Instant glue suitable for gluing and repairing glass and crystal objects, such as vases, glasses, jugs, statuettes, bowls, showcases, table surfaces, lamps or frames.<\/p>\n
Before Use<\/strong> Pre-treatment of surfaces During use<\/strong> After use<\/strong> Storage conditions<\/strong> Manufacturer<\/strong>
\nWorking conditions
\nDo not use at temperatures below + 10 \u00b0 C<\/p>\n
\nThe surface must be dry, clean, free of dust and oil and apply properly. Slightly roughen the metals to achieve a stronger joint.<\/p>\n
\nInstructions for use
\nApply the glue in a thin layer on one side (avoid direct sun exposure)
\nPress both parts firmly and firmly for 10-20 seconds and place the object in direct sunlight
\nDo not move the stuck object until the required welding time is completed
\nBison Glass works under the influence of light (UV rays). Welding is achieved only by direct exposure to the sun
\nIf possible use a UV lamp with a wavelength between 250nm and 350nm
\nPoints of attention
\nBison Glass matures under the influence of ultraviolet light, ie outside, under sunlight or inside a window. Bison Glass does not mature under a cloudy sky or in artificial light. The use of an ultraviolet lamp with a wavelength between 250 and 350 nm allows it to direct light at adhesive joints, thus allowing them to harden.<\/p>\n
\nStains \/ residues
\nRemove stains with acetone. Dry glue residues can only be removed mechanically.<\/p>\n
\nStore in a dry, cool place, where there is no possibility of ice formation.<\/p>\n
\nBison<\/p>\n","protected":false},"excerpt":{"rendered":"